 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Displays AND104SLD-HB 800 x 600 Pixels LCD Color Monitor The AND104SLD-HB is a compact full color TFT LCD module, whose driving board is capable of converting composite video signals to the proper interface of LCD panel and is suitable for car TV, portable DVD and GPS, multimedia applications and other AV systems. This device consists of amorphous silicon TFT liquid crystal display with B/L unit. The display has 1440 x 234 pixels on a 7.0 inch diagonal screen. X and Y drivers, LSI controller, and a built-in CCFL backlight inverter (with optional board.) Features * Pixel in stripe configuration * 10.4 inch (26.4 cm) diagonal screen * High brightness 2-CCFL backlight (350 Nits) * Slim and compact, designed for O/A application * Amorphous silicon TFT-LCD with B/L unit * Display Colors: 262,144 colors * +3.3V DC supply voltage for TFT LCD panel driving * Wide viewing angle * RoHS compliant Mechanical Characteristics Item Specification Screen Size Display Format Display Colors Active Area Pixel Pitch Pixel Configuration Outline Dimensions Weight Backlight Surface Treatment Display Mode Gray Scale Inverstion Direction 10.4 inch (26.4 cm) diagonal 800 x (R, G, B) x 600 262,144 211.2 (H) x 158.4 (V) 0.264 (H) x 0.264 (V) Stripe 243 (W) x 185.1 (H) x 10.5 (D) (typ.) 475 20 CCFL, 2-CCFL Anti-glare and Wide View Film Normally White 12 o'clock Unit - dot - mm mm - mm g - - - - Product specifications contained herein may be changed without prior notice. It is therefore advisable to contact Purdy Electronics before proceeding with the design of equipment incorporating this product. Purdy Electronics Corporation * 720 Palomar Avenue * Sunnyvale, CA 94085 Tel: 408.523.8200 * Fax: 408.733.1287 * sales@purdyelectronics.com * www.purdyelectronics.com 11/24/08 1 Displays TFT-LCD Optical Characteristics Item Horizontal Vertical AND104SLD-HB Symbol Conditions Specifications Typ. Max. 60 55 40 400 15 25 80 350 0.33 0.37 - - - - - - 50 50 - - 0.36 0.40 3.5 - Units deg deg deg - ms ms % cd/m2 - - % hrs Min. 55 (to 12 o'clock) (to 6 o'clock) CR TR Tf U L x y CTK - CR 10 Viewing Angle 50 35 Contrast Ratio Rise Optimum direction 200 - - 55 300 0.30 0.34 - 50,000 Response Time Uniformity Luminance White Chromaticity Cross Talk Ratio Lamp Life Time Fall = 0 / = 0 - = 0 / = 0 + 25 C Input Terminals: TFT-LCD Panel Driving - Connector type: MOLEX 53779-1470 Pin # 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Symbol VDD VDD GND GND IN0IN0+ IN1IN1+ IN2IN2+ CLKCLK+ GND GND Description Power supply: +3.3V Power supply: +3.3V Ground Ground Pixel Data Transmission Pair 0 (negative -) Pixel Data Transmission Pair 0 (positive +) Pixel Data Transmission Pair 1 (negative -) Pixel Data Transmission Pair 1 (positive +) Pixel Data Transmission Pair 2 (negative -) Pixel Data Transmission Pair 2 (positive +) Sampling Clock (negative -) Sampling Clock (positive +) Ground Ground 11/24/08 Purdy Electronics Corporation * 720 Palomar Avenue * Sunnyvale, CA 94085 Tel: 408.523.8200 * Fax: 408.733.1287 * sales@purdyelectronics.com * www.purdyelectronics.com 2 Displays Electrical Characteristics - Recommended Operating Conditions GND=0V, Ta=25C Item Symbol Min. Typ. Max. VDD Supply Voltage 3.0 3.3 3.6 Current Dissipation LVDS Differential Input High Threshold LVDS Differential Input Low Threshold Lamp Current Lamp Voltage Starting Voltage (25C) (Reference Value) Starting Voltage (0C) (Reference Value) Starting Voltage (-20C) (Reference Value) Lamp Driving Frequency Lamp Power Consumption IDD VTH VTL IFL VL VS VS VS FL - - - -100 6.0 420 - - - 20 5.88 190 - - 14.0 475 - - - 50 6.65 380 100 - 16.0 530 810 1080 1125 80 7.42 AND104SLD-HB Unit V mA mV mS Vrms Vrms Vrms Vrms KHz W Note 5, IL = 14mA Note 1 Note 2 Note 3, Note 5 Note3, IL = 14mA Note 4 Remarks Note 1: To test the current dissipation of VDD, using the "color bars" testing pattern shown below: IDD current dissipation testing pattern Note 2: This LCD module conforms to LVDS standard. Note 3: The backlight driving waveform should be as close to sine-wave as possible. In order to satisfy the quality of B/L, no matter the kind of inverter, the output lamp current must be between Min. and Max. to avoid the abnormal display image caused by B/L. Note 4: The "Max. of starting voltage" means the minimum voltage of inverter to turn on the CCFL and it should be applied to the lamp for more than 1 second to start up. Otherwise the lamp may not be turned on. Note 5: Lamp current is measured with current meter for high frequency as shown below: Lamp current dissipation testing configuration Note 6: The life time is determined as the time at which brightness of lamp is 50% compare to that of initial value at the typical lamp current. 11/24/08 Purdy Electronics Corporation * 720 Palomar Avenue * Sunnyvale, CA 94085 Tel: 408.523.8200 * Fax: 408.733.1287 * sales@purdyelectronics.com * www.purdyelectronics.com 3 Displays LVDS Interface Block Diagram AND104SLD-HB Backlight Driving - Connector Type: BHR-03VS-1 of Japan Solderless Terminal MFG Co., LTD Pin No. 1 2 3 Symbol LV HV HV Description Ground Lamp Power Input Lamp Power Input Remarks White Pink ( or Gray) Pink (or Gray) Backlight Absolute Maximum Ratings GND=0V, Ta=25C Parameters Supply Volate Backlight Driving Voltage Backlight Driving Frequency Blcok Diagram Symbol VDD VL FL Min. -0.3 - 20 Max. +4.0 2000 80 Unit V V KHz 11/24/08 Purdy Electronics Corporation * 720 Palomar Avenue * Sunnyvale, CA 94085 Tel: 408.523.8200 * Fax: 408.733.1287 * sales@purdyelectronics.com * www.purdyelectronics.com 4 Displays Timing Specifications Item Frame Cycling Vertifcal Display Period Horizontal Scanning Time Horizontal Display Period Clock Cycle Clock High Level Time Clock Low Level Time Hold time Setup time Symbol t1 t2 t3 t4 t5 t6 t7 t8 t9 Min. 604 x t3 - 600 x t3 920 x t5 - 800 x t5 - 9.0 9.0 4.0 5.0 Typ. 628 x t3 16.58 600 x t3 1056 x t5 26.4 800 x t5 25.0 - - - - AND104SLD-HB Max. 800 x t3 - 600 x t3 1064 x t5 - 800 x t5 - - - - - Unit - ms us ns ns ns ns ns Pixel Arrangement - The LCD module pixel arrangement is the stripe. 11/24/08 Purdy Electronics Corporation * 720 Palomar Avenue * Sunnyvale, CA 94085 Tel: 408.523.8200 * Fax: 408.733.1287 * sales@purdyelectronics.com * www.purdyelectronics.com 5 Displays Dimensional Outline AND104SLD-HB General mechanical toleranc = 0.5mm 11/24/08 Purdy Electronics Corporation * 720 Palomar Avenue * Sunnyvale, CA 94085 Tel: 408.523.8200 * Fax: 408.733.1287 * sales@purdyelectronics.com * www.purdyelectronics.com 6 |
Price & Availability of AND104SLD-HB
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |